Strut and Spring Assembly: Installation
WARNING: This page is about a different car, the 2018 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
-
- Tighten to 63 Nm (46 lb-ft).
-
- Tighten to 225 Nm (166 lb-ft).
-
NOTE: If equipped with dynamic suspension.
- Tighten to 30 Nm (22 lb-ft).
-
- Tighten to 150 Nm (111 lb-ft).
- Install the wheel and tire. Refer to Wheels and Tires .
- Check front camber adjustment. Refer to Suspension System General Information
- If equipped with dynamic suspension, calibrate the suspension height sensor. Connect the scan tool and carry out the Ride Height Calibration routine. Follow the scan tool directions.