FixVault
Home › Lincoln › 2018 › MKZ Select, AWD › Repair and Diagnosis › External Pages › Different car › Section 669 (Engine System - General Information) › General Procedures › Powertrain/Drivetrain Mount Neutralizing

Powertrain/Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2017 Ford Police Interceptor Utility and 2017 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment 

NOTE: Refer to the appropriate information and procedure for special instructions on loosening and tightening mount fasteners.

  1. 1.

    Refer to: Jacking and Lifting - Overview .

  1. 2.

    Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

  1. 3.

    Lower the vehicle.

  1. 4.

    NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

  1. 5.

    Raise and support the vehicle.

  1. 6.

    Tighten the powertrain/drivetrain mount fasteners.

  1. 7.

    Lower the vehicle.

  1. 8.

    Test the system for normal operation.
About FixVault