Overhead Console: Installation

WARNING: This page is about a different car, the 2018 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new overhead console assembly.

Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>BCM (body control module) LIN New Module Initialization).
NOTE: This step is only necessary when installing a new overhead console assembly.

Carry out the BCM self-test. Clear the DTC and then retrieve the DTC from the BCM to confirm all DTC have been cleared.