FixVault
Home › Lincoln › 2019 › MKT Base › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine 3.5L GTDI › In-Vehicle Repair › Flexplate › Installation

In-Vehicle Repair: Flexplate: Installation

  1. NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

    Install the flexplate and the 8 bolts.

    • Tighten in the sequence shown to 80 Nm (59 lb-ft).

    Fig 1: Flexplate Bolt Tightening Sequence
    GFD91849Courtesy of FORD MOTOR CO.
  2. Install the transaxle. For additional information, refer to Automatic Transmission 6F50 6F55 .
  3. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
About FixVault