FixVault
Home › Lincoln › 2019 › MKT Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Electronic Engine Controls › Removal And Installation › Intake Air Temperature (IAT) Sensor › Removal And Installation

Removal And Installation

  1. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor.
    • Lift the tab and turn the IAT sensor counterclockwise to remove.
    GFD92942Courtesy of FORD MOTOR COMPANY
  3. To install, reverse the removal procedure.
    • Make sure the IAT sensor tab is fully seated during installation.
About FixVault