FixVault
Home › Lincoln › 2019 › MKT Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Electronic Engine Controls › Removal And Installation › Knock Sensor (KS) 3.5L GTDI › Removal

Knock Sensor (KS) 3.5L GTDI: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the coolant inlet pipe. Refer to Engine Cooling .
  2. GFD92945Courtesy of FORD MOTOR COMPANY
    • To install, tighten to 20 Nm (177 lb-in).
    GFD92946Courtesy of FORD MOTOR COMPANY
About FixVault