Pinpoint Test J : The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Ford Fiesta. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions

The FCDIM communicates on the Infotainment Controller Area Network (I-CAN), but communicates with the diagnostic scan tool through a gateway module to the HS-CAN. The IPC is the gateway module between the networks.

Possible Sources

Fuse
Wiring, terminals and connectors
FCDIM

Visual Inspection and Diagnostic Pre-checks

Verify CJB fuse 7 (7.5A) is OK.