Common Specifications & Procedures
MKZ (HYBRID)
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning | ||||
| Hybrid | ||||
| Service | SPECIFICATIONS | |||
| Torque | Refer to the specific component in REMOVAL AND INSTALLATION procedure. | |||
| Axle/Hub Nut | 148 lb.ft (200 Nm) | |||
| Battery | ||||
| Hybrid | SPECIFICATIONS | |||
| Brakes RR, LR, RF, LF |
||||
| Hybrid | ||||
| Bleeding Sequence | Brake System Pressure Bleeding | |||
| Front Disc Brakes w/Torque | Refer to the appropriate REMOVAL AND INSTALLATION procedure. | |||
| Rear Disc Brakes w/Torque | Refer to the appropriate REMOVAL AND INSTALLATION procedure. | |||
| Engine Cooling | ||||
| Hybrid - 2.0L Duratec - Hybrid (96kW/130PS) | ||||
| General Service Specifications | SPECIFICATIONS | |||
| Thermostat R&I | Thermostat and Thermostat Housing | |||
| Water Pump R&I | Coolant Pump | |||
| Engine Mechanical | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | ||||
| Compression | SPECIFICATIONS | |||
| Oil Pressure | Oil pressure (hot @ 2, 000 rpm) 200-414 kPa (29-60 psi) |
|||
| Overhaul | SPECIFICATIONS | |||
| Torque | Refer to the appropriate component in REMOVAL AND INSTALLATION procedure. | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |||
| Flywheel/Flex Plate Torque | ||||
| Automatic/Manual | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) |
For tightening bolt sequence, refer to Flywheel . Stage 1: 37 lb.ft (50 Nm) Stage 2: 59 lb.ft (80 Nm) Stage 3: 83 lb.ft (112 Nm) |
|||
| Fuel System | ||||
| Fuel Filter Location | Lifetime filter part of Fuel Pump Module. | |||
| Fuel Filter R & I | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | Fuel Pump and Sender Unit | |||
| Pressure Release Procedure | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | Fuel System Pressure Release | |||
| Pressure Specification | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | Engine Running: 50.8 -65.3 psi (350 -450 kPa) | |||
| Fuel Pressure Test Procedure | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | Fuel System Pressure Check | |||
| Ignition | ||||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Routing | Engines have coil-on-plug ignition. | |||
| Spark Plugs | ||||
| Type | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | AYFS 32Y R | |||
| Gap | ||||
| 2.0L Duratec - Hybrid (96kW/130PS) | 0.51 in (1.3 mm) | |||
| 2.0L Duratec - Hybrid (96kW/130PS) | 106 In. Lbs. (12 (N.m) | |||
| 2.0L Ecoboost (184KW/250PS) - MI4 | 106 lb.in (12 Nm) | |||
| 3.0L EcoBoost | 133 lb.in (15 Nm) | |||
| Wheel Alignment | ||||
| Adjustment Specifications | SPECIFICATIONS . | |||
| Torque | Refer to the appropriate procedure in GENERAL PROCEDURES . | |||
| Wheel & Tire | ||||
| Wheel Lug Nut Torque | For tightening sequence, refer to Wheel and Tire
. 150 Ft. Lbs. (204 N.m) |
|||