Pinpoint Test B: Control Module Improper Wake-Up Performance

Normal Operation and Fault Conditions

This DTC is pre-set in a new ABS module and can only be cleared when the Brake System Service Bleed is successfully carried out. REFER to: Brake System Pressure Bleeding .

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
ABS U3012:68	Control Module Improper Wake-up Performance: Event Information	This DTC is pre-set in a new ABS module and can only be cleared when the Brake System Service Bleed is successfully carried out. REFER to: Brake System Pressure Bleeding .

Possible Causes

Brake System Service Bleed not complete

Diagnostic steps are not provided for this symptom or DTC. REFER to: DIAGNOSTIC METHODS (100-00 General Information, Description and Operation).