Parking Aid
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not communicate with the diagnostic scan tool | Fuse Wiring, terminals or connectors IPMA |
REFER to: Controller Area Network (CAN) Module Communications Network . |
| The audible parking aid is inoperative | Refer to the Pinpoint Test. | GO to Pinpoint Test A |
| Continuous or intermittent tone when no obstacles or fault codes are present | Refer to the Pinpoint Test. | GO to Pinpoint Test Q |
| The parking aid audio tones are inoperative | Refer to the Pinpoint Test. | GO to Pinpoint Test A |
| The parking aid switch is inoperative or does not operate correctly | Refer to the Pinpoint Test. | GO to Pinpoint Test D |
| The reverse brake assist is inoperative or does not operate correctly | Refer to the Pinpoint Test. | REFER to: appropriate Blind Spot Information System service information. . |
| Sensor blockage | Refer to the Pinpoint Test. | GO to Pinpoint Test Q |
| The parking aid menu is not available in the message center and cannot be deactivated | A MyKey® restricted key is in use | Normal operation. |