FixVault
Home › Mazda › 1980 › RX-7 GS, Automatic Trans › Repair and Diagnosis › Engine Mechanical › Auxiliary Emission Control Systems › Auxiliary Controls › Testing › Full Choke Switch

Full Choke Switch

  1. Disconnect coupler from choke switch. Check continuity between numbered terminals in coupler, using an ohmmeter.
  2. Continuity should exist between No. 4 and No. 5 terminals when choke knob is pulled out about 1" (25 mm).
    Fig 1: Coupler Terminal Locations for Testing Choke and Full Choke Switches
    G09324585Courtesy of MAZDA MOTORS CORP.
About FixVault