NIKKI 2-Barrel - MAZDA B2000: Overhaul: Reassembly
To assemble, reverse disassembly procedure. Be careful not to mistake primary and secondary parts. When installing thermostat cover on automatic choke housing, hook choke arm to bi-metal spring. Check correct operation of choke valve by turning thermostat cover. Then align index mark on cover with center mark on choke housing and tighten screws. Install new mixture screw and limiter shell.
CARBURETOR ADJUSTMENT SPECIFICATIONS
| Application |
Idle Speed (Engine RPM) |
Float Level Setting In. (mm) |
Float Drop Setting In. (mm) |
Choke Linkage (Off Car) In. (mm) |
Accelerator Cable Free Play |
Choke Valve Opening In. (mm) |
| Hot |
Fast |
| B2000 |
650 |
|
.335 (8.5) |
.039 (1.0) |
.051-.059 (1.2-1.5) |
..... |
.016-.028 (.40-.70) |