Alternator & Regulator: Overhaul: Disassembly
- After removing through bolts, insert screwdriver between front housing and stator to separate.
- Hold the rotor in a soft jawed vice. Remove pulley nut, pulley, fan, and spacer. Remove rotor drive end housing by lightly tapping end housing with a soft mallet.
- To separate stator from diode end housing, unsolder 3 negative diode leads and connections between diodes. Hold the stator lead with a needle nose plier to prevent rectifier from overheating.
- Remove condenser from the "B" terminal. Unsolder the "L" and "B" terminal from the rectifier assembly. Lift out rectifier assembly and brush holder.