FixVault
Home › Mazda › 1984 › B2000 Base, Standard › Repair and Diagnosis › Transmission › Automatic Trans › Servicing - A/T › Adjustments › Gearshift Linkage › RX7

Gearshift Linkage: RX7

  1. Remove boot plate. Place selector lever in "P". Loosen selector lever plate adjustment bolt. Raise vehicle and support with safety stands. Move transmission selector rod to "P" position (first detent from rear of transmission).
  2. Tighten selector lever plate adjustment bolt to 23-34 ft. lbs. (32-47 N.m). Lower vehicle. Place selector lever in each position to ensure that selector lever functions properly.
About FixVault