Wiper Motor: RX7
- To check front circuit, measure voltage between terminal "L" and ground with ignition on. SeeFig 1 . If no voltage, check fuse or repair harness. Check ground between line "B" and body ground for continuity.
- To check the front motor, connect the positive lead from the battery to terminal "A" of motor. SeeFig 1 . Connect the negative lead to terminal "B". Motor should turn at low speed. Connect the negative to terminal "C" to check high speed.
- To check rear circuit, be certain there is voltage to the main line, then check the motor by connecting the positive lead from battery to terminal "A" of motor. Connect the negative to terminal B and C. Motor should turn. SeeFig 1 .