FixVault
Home › Mazda › 1986 › 626 Base › Repair and Diagnosis › External Pages › Different car › Section 12 (Engine Controls - Remove/Install/Overhaul) › Fuel System › Upper Intake Manifold › Removal (B3000)

Removal (B3000)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, 1998 Mazda B4000, and 1998 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air cleaner outlet tube. Disconnect accelerator and cruise control cable from throttle body.
  2. Disconnect harness connectors from throttle body and upper intake manifold. Remove EGR valve. Disconnect vacuum hoses from EGR valve and EGR solenoid. If necessary, remove bolts and throttle body.
  3. Remove ignition coil mounting bolts and coil assembly. Remove EGR transducer. Disconnect evaporative emissions hose. Evenly loosen 3 bolts and 3 stud bolts and remove upper intake manifold.
About FixVault