Ignition Timing
- Warm engine to normal operating temperature. Turn off all unnecessary electrical loads. Connect a tachometer and check idle speed. Connect a timing light to high-tension lead of front leading side.
- Check that mark on pulley is aligned with indicator pin. Connect timing light to high-tension lead of front trailing-side, and check timing. If necessary, turn crank angle sensor to adjust. The Yellow mark is 5 degrees ATDC and the Red mark is 20 degrees ATDC.
IGNITION TIMING SPECIFICATIONS
| Application | Specification (Degrees ATDC @ RPM) |
|---|---|
| Leading | 5 @ 750 |
| Trailing | 20 @ 750 |