FixVault
Home › Mazda › 1987 › RX-7 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Air Injection System › System Testing › Air Induction System › Coolant Thermo Valve (Man. Trans. & Turbo)

Coolant Thermo Valve (Man. Trans. & Turbo)

  1. Remove coolant thermo valve from engine. Immerse coolant thermo valve in water.
  2. Heat water gradually and observe the temperature. Below approximately 140°F (60°C), air should pass from top vacuum line to bottom vacuum line. Above approximately 140°F (60°C), air should pass from top vacuum line to orifice on top of thermo valve.
About FixVault