FixVault
Home › Mazda › 1988 › 323 Base, 2D Hatchback › Repair and Diagnosis › Engine Performance › System › EGI Control System › Diagnosis & Testing › Component Testing › Neutral Switch (M/T)

Neutral Switch (M/T)

  1. Disconnect 2-pin connector behind battery. Measure resistance between Brown/Black wire and ground. If resistance is zero ohms, use other side of connector.
  2. Place transaxle in neutral position. Resistance between Red/Blue wire and Brown/Black wire should be infinite.
  3. Place transaxle in any gear. Resistance between Red/Blue wire and Brown/Black wire should be zero ohms.
About FixVault