Fuel Injectors: Removal
- Disconnect negative battery cable. Release fuel pressure. See FUEL PRESSURE RELEASE in this article. Dynamic chamber and throttle body must be removed. See Figure or Figure .
- On turbo models, remove intercooler and oil filler pipe. See Figure . On non-turbo models, remove air funnel. On all models, remove accelerator cable, cruise control cable (if equipped) and metering oil pump connecting rod.
- Disconnect all electrical connectors from dynamic chamber and throttle body. Mark vacuum hose position. Remove all vacuum hoses and coolant hoses. Remove dynamic chamber.
- Cover intake manifold ports. Disconnect all fuel lines. Remove delivery pipe from top of injectors. Remove injectors, injector insulators and air bleed sockets (turbo) located below injectors.