Ignition Timing
WARNING: This page is about a different car, the 1989 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use of vehicle battery powered timing light is preferred.
- Warm engine to normal operating temperature. Turn off all accessories. Connect a jumper wire between Green test connector and ground. Connect timing light to high-tension lead of front leading side.
- Check that mark on pulley is aligned with indicator pin. Connect timing light to "L1" (high-tension) lead. Check leading and trailing timing. If necessary, turn crank angle sensor to adjust.
IGNITION TIMING
| Application | Leading (Yellow) | Trailing (Red) |
|---|---|---|
| RX7 | 5@750 | 20@750 |