Idle Speed: 929

Connect jumper wire between ground and Green 1-pin test connector in left front corner of engine compartment. See Figure and Figure . Connect tachometer to test connector at ignition coil.
If idle speed is not within specification, rotate idle air adjusting screw on throttle body. See IDLE SPEED SPECIFICATIONS TABLE . Disconnect jumper wire.

IDLE SPEED SPECIFICATIONS

Application

RPM - Man. Trans.

⁽¹⁾ RPM - Auto. Trans.

B2200

Carbureted

825

PFI ⁽²⁾

750

770

B2600i ⁽²⁾

750

770

Miata ⁽²⁾

850

MPV

2.6L ⁽²⁾

750

770

3.0L ⁽²⁾

800

MX-6 ⁽²⁾

750

Navajo

⁽³⁾

Protege ⁽²⁾

750

RX7 ⁽²⁾

750

323 ⁽²⁾

750

626 ⁽²⁾

750

929

DOHC ⁽²⁾

N/A

700

SOHC ⁽²⁾

N/A

650

⁽¹⁾	Place automatic transmission in Park.

⁽²⁾	Connect jumper wire between Green test connector and ground.

⁽³⁾	See idle speed adjustment procedure.