Exhaust System BACKPRESSURE
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1990 Mazda RX-7, 1990 Mazda Protege, 1990 Mazda MX-6, 1990 Mazda MX-5 Miata, and 1990 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
The exhaust system can be checked with a vacuum or pressure gauge. Remove O2 sensor or air injection check valve. Connect a 1-10 psi pressure gauge and run engine at 2500 RPM. If exhaust system backpressure is greater than 1 3/4-2 psi, exhaust system or catalytic converter is plugged.
If a vacuum gauge is used, connect vacuum gauge hose to intake manifold vacuum port and start engine. Observe vacuum gauge. Open throttle part way and hold steady. If vacuum gauge reading slowly drops after stabilizing, exhaust system should be checked for a restriction.