FixVault

Torque Specifications

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1992 Mazda Protege, 1992 Mazda MX-6, 1992 Mazda MX-3, 1992 Mazda MPV, and 1992 Mazda B2600i. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
B2600i 4WD
Brake Caliper Mounting Bolts 65-87 (88-118)
Control Arm Ball Joint Nut - Lower 87-116 (118-157)
Control Arm Ball Joint Nut - Upper 22-38 (29-51)
Drive Axle Lock Nut (1)
Drive Flange Hub Bolts 22-25 (29-34)
Dust Cover Mounting Bolts 14-19 (19-25)
Engine Under Cover Bolts 23-34 (31-46)
Tie Rod End Nut 23-43 (31-58)
Shock Absorber Lower Mount Bolt 41-59 55-80)
Stabilizer Bar Nut (2)
Wheel Lug Nuts - Standard Wheel 65-87 (88-118)
Wheel Lug Nuts - Styled Wheel 87-108 (118-146)
MPV 4WD
Drive Axle Lock Nut 174-231 (236-314)
Engine Under Cover Bolts 12-17 (16-23)
Lower Control Arm Ball Joint-To-Control Arm Bolts 75-101 (102-137)
Lower Control Arm Ball Joint-To-Control Arm Through Bolt Nut 94-127 (128-172)
Lower Control Arm Ball Joint-To-Steering Knuckle Nut 116-138 (157-187)
Stabilizer Bar Nut (3)
Tie Rod End Nut 43-58 (58-78)
Wheel Lug Nuts 65-87 (88-118)
MX-3
Drive Axle Lock Nut 174-235 (235-319)
Intermediate Shaft Bearing Bracket Bolts 31-46 (42-62)
Lower Control Arm Ball Joint-To Steering Knuckle Nut 32-43 (43-58)
Stabilizer Bar-To-Stabilizer Link Nut 32-45 (43-61)
Stabilizer Link-To-Lower Control Arm Nut 31-42 (42-57)
Tie Rod End Nut 31-42 (42-57)
Wheel Lug Nuts 65-87 (88-118)
MX-6 & 626
Drive Axle Lock Nut 174-235 (236-319)
Intermediate Shaft Bearing Bracket - Large Bolt 31-46 (42-62)
Intermediate Shaft Bearing Bracket - Small Bolt (4)
Lower Control Arm Ball Joint-To-Steering Knuckle Nut 27-40 (37-54)
Stabilizer Bar Nut (5) 12-17 (16-23)
Tie Rod End Nut 31-42 (42-57)
Wheel Lug Nut 65-87 (88-118)
Protege & 323
Drive Axle Lock Nut 174-235 (235-319)
Intermediate Shaft Bearing Bracket Bolts 31-46 (42-62)
Lower Control Arm Ball Joint-To-Steering Knuckle Nut 32-43 (43-58)
Stabilizer Bar Nut (6)
Tie Rod End Nut 31-42 (42-57)
Wheel Lug Nuts 65-87 (88-118)
INCH Lbs. (N.m) 
Bearing Set Lock Screws (B2600i 4WD) 43-61 (5-7)
Inner Fender Shield Bolts
(MX-3, MX-6, Protege, 323 & 626) 69-95 (7.8-11)
(1)
Tighten drive axle lock nut during wheel bearing preload adjustment. See WHEEL BEARING under ADJUSTMENTS & INSPECTION in SUSPENSION - FRONT article for B2200 & B26OOI in the SUSPENSION section.
(2)
Tighten stabilizer bolt until distance from top of bolt to top of nut is .55-.73" (14.0-18.5 mm).
(3)
Tighten stabilizer bolt until distance from top of bolt to top of nut is .24" (6.0 mm).
(4)
Tighten small bolt to 5-35 INCH lbs. (6.8-47.0 N.m).
(5)
Tighten stabilizer bolt until distance from top of bolt to top of nut is .71-.87" (18.0-22.0 mm).
(6)
Tighten stabilizer bolt until distance from top of bolt to top of nut is .67-.75" (17.0-19.0 mm).