FixVault
Home › Mazda › 1992 › B2200 Base, 2D Pickup, Standard › Repair and Diagnosis › External Pages › Different car › Section 3 (Wheel Alignment Specifications & Procedures) › Wheel Alignment Procedures › Caster Adjustment › Navajo

Caster Adjustment: Navajo

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Mazda RX-7, 1991 Mazda Protege, 1991 Mazda Navajo, 1991 Mazda MX-6, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure caster to determine if adjustment is required. Record specifications for use in selection of camber/caster adjusters. To adjust, raise vehicle and remove front wheel assembly. Remove caliper and steering knuckle assembly.
  2. Remove pinch bolt and camber/caster adjuster from axle. See Figure. Install appropriate camber/caster adjuster and rotate to desired adjustment. See Figure. Install NEW adjuster snap ring. Install caliper, steering knuckle and wheel assembly. Check alignment to verify correct adjustment.
About FixVault