FixVault
Home › Mazda › 1992 › B2200 Base, 2D Pickup, Standard › Repair and Diagnosis › External Pages › Different car › Section 3 (Wheel Alignment Specifications & Procedures) › Wheel Alignment Procedures › Toe-In Adjustment (Rear)

Toe-In Adjustment (Rear)

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Mazda RX-7, 1991 Mazda Protege, 1991 Mazda Navajo, 1991 Mazda MX-6, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Both left and right tie-rods have right-hand threads. To increase toe-in, turn right tie-rod toward front of vehicle, and turn left tie-rod the same amount toward rear of vehicle.
  1. Loosen left and right adjusting lock nuts or bolts. On RX7 & 929, to increase toe-in on right side, turn adjusting cam counterclockwise. To increase toe-in on left side, turn cam clockwise. To decrease toe-in on right side, turn cam clockwise. To decrease toe-in on left side, turn adjusting cam counterclockwise.
  2. On 323, MX-6 and 626, to increase toe-in on right side turn adjusting rod counterclockwise. To increase toe-in on left side turn rod clockwise. To decrease toe-in on right side turn rod clockwise. To decrease toe-in on left side turn adjusting rod counterclockwise.
  3. On Miata, to increase toe-in on right side turn adjusting cam clockwise. To increase toe-in on left side turn cam counterclockwise. To decrease toe-in on right side turn cam counterclockwise. To decrease toe-in on left side turn adjusting cam clockwise.
About FixVault