Cruise Control Switch
- Remove steering wheel cover. With button pressed, check resistance between specified terminals of cruise control switch connector. Refer to the CRUISE CONTROL SWITCH RESISTANCE TEST . See Fig 1 .
- Replace switch if resistance is not as specified. If resistance is as specified but problem still exists, remove steering wheel and check slip rings and wiring.
CRUISE CONTROL SWITCH RESISTANCE TEST
| Switch Position | Ohms |
|---|---|
| No Buttons Pressed | Infinite Ohms |
| RESUME/ACCEL | 910 Ohms |
| SET/COAST | 240 Ohms |
| CANCEL | 0 Ohms |