FixVault

No-Load Test

Connect fully-charged 12-volt battery, voltmeter and ammeter to starter. See Figure. Using remote starter wires or jumper, engage solenoid. Starter should spin smoothly. Compare readings with specifications. See NO-LOAD TEST SPECIFICATIONS table. If voltage is less than specified, amperage is more than specified or shaft speed is less than specified, disassemble and inspect starter components.

NO-LOAD TEST SPECIFICATIONS

Application Specification
B2200 A/T
Voltage (Minimum) 11.0
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 3000
B2600i
A/T
Voltage (Minimum) 11.5
Amperage (Maximum) 100
Shaft Speed (Minimum RPM) 3000
M/T
Voltage (Minimum) 11.5
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 4000
MPV
4-Cylinder
Standard (1.2kW)
Voltage (Minimum) 11.5
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 4000
Heavy Duty (1.4kW)
Voltage (Minimum) 11.5
Amperage (Maximum) 100
Shaft Speed (Minimum RPM) 3000
V6
Voltage (Minimum) 11.0
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 2900
MX-3 V6
A/T
Voltage (Minimum) 11.0
Amperage (Maximum) 70
Shaft Speed (Minimum RPM) 2200
M/T
Voltage (Minimum) 11.0
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 2900
MX-6 & 626
4-Cylinder
Voltage (Minimum) 11.0
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 3000
V6
A/T
Voltage (Minimum) 11.0
Amperage (Maximum) 70
Shaft Speed (Minimum RPM) 2200
M/T
Voltage (Minimum) 11.0
Amperage (Maximum) 90
Shaft Speed (Minimum RPM) 2900
Protege A/T & 929 (1)
(1) Information is not available from manufacturer.