Fuel Gauge Sending Unit
WARNING:
On vehicles with fuel-injected engine, relieve fuel pressure before servicing fuel system.
- Remove fuel gauge sending unit. Connect ohmmeter between the following wire terminals of fuel gauge sending unit connector:
- Blue/White and Black.
- Measure resistance with fuel gauge sending unit float at specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.
FUEL GAUGE SENDING UNIT RESISTANCE (1)
| Float Position | Ohms | ||
|---|---|---|---|
| Fully Raised | 6 | ||
| Mid-Range | 33 | ||
| Fully Lowered | 97 | ||
|
|||