FixVault

Symptom No. 1

  1. Turn ignition on. Check 30-amp power window circuit breaker in fuse block, near left kick panel. If circuit breaker is blown, replace circuit breaker (repair wiring if necessary). If circuit breaker is okay, measure voltage at Light Blue/Black wire terminal of main switch connector.
  2. If battery voltage is not present, repair Light Blue/Black wire between circuit breaker and main switch. If battery voltage is present, disconnect main switch connector. Check continuity between ground and Black wire terminal of main switch connector. If continuity does not exist, repair Black wire between ground and main switch. If continuity exists, check main switch. See MAIN SWITCH TEST under COMPONENT TESTING.