Fresh/Recirculated Air Selector Switch

Remove control panel. See CONTROL PANEL under REMOVAL & INSTALLATION. Push indicated switch on control panel, and check continuity between appropriate terminals. See FRESH/RECIRCULATED AIR SELECTOR SWITCH TEST table. See Fig 1 . Replace control panel if continuity is not as specified.

Fig 1: Control Panel Connector Terminal ID (Push-Button Type)

Courtesy of MAZDA MOTORS CORP.

FRESH/RECIRCULATED AIR SELECTOR SWITCH TEST

Switch Position

⁽¹⁾ Continuity Between Terminals

Recirculated Air

1C & 1J

Fresh Air

1A & 1J

⁽¹⁾	Continuity should not be present with switch released.