Control Switch
Disconnect control switch 8-pin connector. Check continuity between specified terminals of control switch connector with control switch in specified position. See CONTROL SWITCH CONTINUITY TEST table. SeeFig 1 . If continuity does not exist between terminals as specified, replace control switch.
CONTROL SWITCH CONTINUITY TEST
| Switch Position | Terminals No. | ||
|---|---|---|---|
| Neutral | (1) | ||
| Front Up | 2 & 7 To 1, 3, 4, 5, 6 & 8 | ||
| Front Down | 2 & 5 To 1, 3, 4, 6, 7 & 8 | ||
| Seat Up | 1, 2 & 7 To 3, 4, 5, 6 & 8 | ||
| Seat Down | 1, 3, 4, 7 & 8 To 2, 5 & 6 | ||
| Seat Rearward | 1, 4, 5, 6, 7 & 8 To 2 & 3 | ||
| Seat Forward | 1, 3, 4, 5, 6 & 7 To 2 & 8 | ||
| Rear Up | 1 & 2 To 3, 4, 5, 6, 7 & 8 | ||
| Rear Down | 1, 3, 4, 5, 7 & 8 To 2 & 6 | ||
|
|||