Fuel Gauge Sending Unit
WARNING:
Relieve fuel pressure before servicing fuel system.
- Remove fuel gauge sending unit. Connect ohmmeter between the Yellow/White and Black/Yellow wire terminals of fuel gauge sending unit connector.
- Measure resistance with fuel gauge sending unit float at specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.
FUEL GAUGE SENDING UNIT RESISTANCE (1)
| Float Position | Ohms | ||
|---|---|---|---|
| Fully Raised | 145 | ||
| Fully Lowered | 22.5 | ||
|
|||