FixVault
Home › Mazda › 1995 › Protege ES, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Servicing - A/T › Adjustments › Transmission Range Sensor/Switch

Transmission Range Sensor/Switch

  1. Disconnect negative battery cable. Remove battery, air cleaner assembly and battery tray. Disconnect selector cable. Place manual shaft in Neutral. Disconnect transmission range switch connector. Loosen transmission range switch mounting bolts at transmission and hand tighten.
  2. Connector ohmmeter between terminals "A" and "H". See Fig 1 . Adjust switch until continuity exists. Tighten transmission range switch mounting bolts to 71-97 INCH Lbs. (8-11 N.m). Verify switch operation.
Fig 1: Identifying Transmission Range Switch Terminals
G97E08220Courtesy of MAZDA MOTORS CORP.
About FixVault