Test No. 2
- Remove center console. Remove security light. Measure voltage at terminal "A" (Blue/Red wire) of security light 3-pin connector. If battery voltage is not present, repair wiring between ROOM fuse and security light. If battery voltage is present, check continuity between terminals "A" (Blue/Red wire) and "B" (Violet/Green wire) of security light connector.
- If continuity does not exist, replace security light. If continuity exists, disconnect CPU No. 2 20-pin connector. Check continuity between terminal "B" (Violet/Green wire) of security light connector and terminal 1R (Violet/Green wire) of CPU No. 2 connector. SeeFigure . If continuity does not exist, repair wiring between security light and CPU No. 2. If continuity exists, replace CPU No. 2.