FixVault
Home › Mazda › 1995 › RX-7 Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Servicing - A/T › Adjustments › Transmission Range Sensor/Switch

Transmission Range Sensor/Switch

NOTE: Transmission range switch is equipped.
  1. Place gearshift lever in "N" position. Ensure gearshift lever is adjusted correctly. See GEARSHIFT LEVER  . Loosen transmission range switch mounting bolts at transmission. Remove screw from alignment pin hole at bottom of switch (if equipped).
  2. Rotate switch and insert a 5/32" alignment pin (or drill bit) through alignment holes.
  3. Tighten mounting bolts to specification. See TORQUE SPECIFICATIONS  . Remove alignment pin. Install alignment pin hole screw (if equipped) and check switch operation. Vehicle should start only with gearshift in "P" or "N" position.
About FixVault