Valve Reset Switch
- Disconnect valve assembly connector. Using ohmmeter, measure resistance between terminal No. 2 and valve body of valve assembly connector. Depress brake pedal and hold for 30 seconds. Resistance should be more than 10,000 ohms. If resistance is not as specified, replace valve assembly. If resistance is okay, go to next step.
- Drive vehicle at about 10 MPH on dry pavement. Depress brake pedal enough to lock all wheels. After vehicle stops, place gear selector in Park (A/T) or Neutral (M/T). Remove foot from brake pedal and wait 30 seconds. If Yellow RABS warning light illuminates, perform self-diagnostics. See PRE-DIAGNOSIS INSPECTION .