Fuel Gauge Sending Unit
WARNING:
Relieve fuel pressure before servicing fuel system.
- Remove fuel gauge sending unit. Connect ohmmeter between the following wire terminals of fuel gauge sending unit connector.
- Yellow/White wire and Black/Yellow wire.
- Measure resistance with fuel gauge sending unit float in specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.
FUEL GAUGE SENDING UNIT RESISTANCE (1)
| Float Position | Ohms | ||
|---|---|---|---|
| Fully Raised | 160 | ||
| Fully Lowered | 15 | ||
|
|||