FixVault
Home › Mazda › 1997 › B4000 Base › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Fuel System › Fuel Line Connectors › Disconnect (Spring Lock Coupler)

Disconnect (Spring Lock Coupler)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49-UN01-051 for 3/8" line, 49-UN01-052 for 1/2" line) over fuel line coupler. See Figure .
  2. Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.
About FixVault