FixVault
Home › Mazda › 1997 › B4000 Base › Repair and Diagnosis › External Pages › Different car › Section 15 (Engine Controls - Basic Testing) › Fuel System › Fuel Pressure › Fuel Pressure Regulator Diaphragm

Fuel Pressure Regulator Diaphragm

WARNING: This page is about a different car, the 1997 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and operate engine at idle for 10 seconds. Turn ignition off for 10 seconds. Again, start and operate engine at idle for 10 seconds, then turn ignition off.
  2. Disconnect fuel pressure regulator vacuum hose. Check fuel pressure regulator vacuum port. If diaphragm is leaking fuel, replace fuel pressure regulator.
About FixVault