FixVault
Home › Mazda › 1997 › B4000 Base › Repair and Diagnosis › External Pages › Different car › Section 22 (Engine Controls - Remove/Install/Overhaul) › Fuel System › Fuel Pressure Regulator › Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect vacuum hose from regulator. Disconnect fuel line coupling at regulator. Refer to FUEL LINE CONNECTORS  .
  2. Remove regulator mounting screws. Remove regulator, "O" ring and washer. To install, reverse removal procedure using NEW washer and "O" ring. Lubricate "O" ring with light oil. DO NOT  use silicone grease.
About FixVault