Engine Oil Level Inspection
WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Position the vehicle on level ground.
- Warm up the engine.
- Stop the engine and allow approx. 5 minutes before continuing.
- Remove the engine cover. See ENGINE COVER REMOVAL/INSTALLATION .
- Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.
- If the oil level is below the L mark, add oil.
- Install the dipstick.
- Install the engine cover. See ENGINE COVER REMOVAL/INSTALLATION .