With Keyless Entry
- Door lock link switch is located inside power door lock actuator. Remove door trim panel. Disconnect door lock actuator 6-pin connector. With door locked, check continuity between terminals "D" (Green/Black wire) and "E" (Blue/Red wire) of door lock actuator connector. If continuity exists, go to next step. If continuity does not exist, replace door lock actuator.
- With door unlocked, check continuity between terminals "D" (Green/Black wire) and "C" (Black wire) of door lock actuator connector. If continuity exists, actuator is good. If continuity does not exist, replace door lock actuator.