FixVault
Home › Mazda › 1997 › MX-6 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Basic Testing - 2.0L › Ignition Checks › Ignition Coil Resistance (2.0L M/T)

Ignition Coil Resistance (2.0L M/T)

  1. Disconnect distributor 3-pin connector. Using ohmmeter, measure primary resistance between terminals "A" and "B". See Figure and Figure . Resistance should be as specified. See IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace distributor.
  2. Remove distributor cap. Using an ohmmeter, measure secondary resistance between terminal "A" and coil tower. See Figure and Figure . Resistance should be as specified. See IGNITION COIL RESISTANCE  table. If resistance is not as specified, replace distributor.
About FixVault