Drive Cycle Procedure

1)  Start engine and warm to normal operating temperature.

2)  Drive vehicle or let engine idle for 4 minutes.

3)  Stop vehicle and let engine idle for 40 seconds.

4)  In "D" range, open throttle to 1/4 - 1/2 and accelerate to 45 MPH and hold speed for 10 seconds.

5)  Maintain consistent throttle opening and hold vehicle speed at 45 MPH for 30 seconds.

6)  Stop vehicle and idle for 40 seconds.

7)  In "D" range, accelerate to 35 MPH and hold speed for 4 minutes.

8)  Stop vehicle and let engine idle for 30 seconds.

9)  In "D" range, accelerate to 30 MPH and hold speed for 6 minutes.

10)  Stop vehicle and let engine idle for 30 seconds.

11)  In "D" range, open throttle to 1/4 - 1/2 and accelerate to 25-40 MPH 3 minutes while also performing the following:

• Stop and idle for 10 seconds at least 5 times.
• Shift transmission between 3 different gears while vehicle speed is 25-40 MPH.

12)  Drive vehicle at constant speed between 25-30 MPH for 1 minute.

13)  Within 8 seconds, accelerate to 55-60 MPH.

14)  Drive vehicle at constant speed between 55-60 MPH for 2 minutes.