Generator & Regulator: Overhaul

NOTE: Overhaul information is not available at time of publication.

Fig 1: Heating Rear Bearing Housing

Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing Rear Bearing

Courtesy of MAZDA MOTORS CORP.

Fig 3: Unsoldering Rectifier From Regulator

Courtesy of MAZDA MOTORS CORP.

Fig 4: Replacing Brushes

Courtesy of MAZDA MOTORS CORP.

Fig 5: Measuring Brush Spring Tension

Courtesy of MAZDA MOTORS CORP.

Fig 6: Inserting Wire To Retain Brushes For Reassembly

Courtesy of MAZDA MOTORS CORP.

Fig 7: Measuring Installed Depth Of Brush

Courtesy of MAZDA MOTORS CORP.

Fig 8: Exploded View Of Generator

Courtesy of MAZDA MOTORS CORP.