Fuel Gauge Sending Unit
WARNING:
Relieve fuel pressure before servicing fuel system.
- Remove fuel gauge sending unit. Connect ohmmeter between the following wire terminals of fuel gauge sending unit connector.
- Green/Yellow wire or Black/Red wire, and Red wire.
- Measure resistance with fuel gauge sending unit float in specified position. See FUEL GAUGE SENDING UNIT RESISTANCE . If resistance is not as specified, replace fuel gauge sending unit.
FUEL GAUGE SENDING UNIT RESISTANCE (1)
| Float Position | Ohms | |||
|---|---|---|---|---|
| Sending Unit No. 1. (Round Float) | ||||
| Fully Raised | 1.5 | |||
| Fully Lowered | 69.3 | |||
| Sending Unit No. 2. (Angular Float) | ||||
| Fully Raised | 1.5 | |||
| Fully Lowered | 25.2 | |||
|
||||