Function Test (1.8L)
Disconnect actuator cable from accelerator. Start engine to supply vacuum to actuator diaphragm. Apply battery voltage and ground to specified terminals of actuator and observe actuator arm. See the ACTUATOR FUNCTION TEST . SeeFigure . If actuator arm does not function as specified, replace actuator.
ACTUATOR FUNCTION TEST (1.8L)
| Apply Voltage to Terminals: | Actuator Arm Result |
|---|---|
| Apply 12 Volts To "A" & Ground "B", "C" & "D" | Pull |
| Apply 12 Volts To "A" & Ground "B" & "C" | Hold |
| Apply 12 Volts To "A" & Ground "B" | Extend |
| Disconnect All Voltage & Ground | Release |