Cruise Control Switch
WARNING:
Deactivate air bag system before performing any service operation. See appropriate AIR BAG RESTRAINT SYSTEMS article. Do not apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy.
Remove driver's side air bag. See appropriate AIR BAG RESTRAINT SYSTEMS article. Disconnect 3-pin cruise control switch harness connector. Check resistance between specified terminals of cruise control switch with switch in specified position. See CRUISE CONTROL SWITCH TEST table. See Fig 1 . If resistance is not as specified, replace cruise control switch.
CRUISE CONTROL SWITCH TEST
| Switch Position | Terminals | Specification |
|---|---|---|
| CRUISE MAIN | A & C | Zero Ohms |
| OFF | A & B | Zero Ohms |
| SET/COAST | A & B | 240 Ohms |
| RESUME/ACCEL | A & B | 910 Ohms |