Customer Supplied 2 Or More Valid Keys
- Cut new transponder equipped key(s), if necessary. Replace PCM. See POWERTRAIN CONTROL MODULE under REMOVAL & INSTALLATION. Using valid 1st key, turn ignition to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid key to LOCK position.
- Using valid 1st key, turn ignition to ON position, then LOCK position 6 times. Ensure 6th turning is done within one second. Remove valid 1st key.
- Using valid 2nd key, turn ignition to ON position. SECURITY light should illuminate for 1-2 seconds. Turn valid 2nd key to LOCK position and remove key.
- Using valid 1st key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn valid 1st key to LOCK position and remove key.
- Repeat step 4) with additional valid key or new 3rd key. Repeat step 4) with each new key, up to 8 keys total. Wait 30 seconds, program will quit automatically.